First, the cow dung should be air-dried or drained so that the water content can be controlled below 85%. Then the straw residue is added. The ratio of cow dung to straw dregs is 7:3, and the water content is controlled between 52% and 68%. Finally add organic fertilizer ferment decomposer.
After raw materials and auxiliary materials and microbial agents are mixed and stirred, they can be fermented on the heap. The requirements for the upper reactor are that the mixture is piled on the fermentation field at a bottom width of 1.8 to 3 meters, and the upper side is 0.8 to 1 meter wide and 1 meter high. A 1.5-meter trapezoidal bar is spaced 0.5 meters apart. After the stack is well prepared, the temperature will rise to more than 60 degrees within 24 to 48 hours, and the temperature will be maintained for 48 hours.
When turning the stack, it must be even and thorough. Put the low-level material into the upper middle of the pile as much as possible to fully decompose. After the first turn, it will be piled once a week. However, when the temperature exceeds 70 degrees, it must be turned immediately, otherwise beneficial microorganisms and fermentation bacteria will be killed in large quantities, which is not conducive to fermentation maturity.
Moisturizing refers to maintaining the water content of the skin, especially the epidermis of the facial skin, by using skin care products and maintaining the body's water balance. This catagory includes Cosmetic Raw Material with skin moisturizing effects, such as Hyaluronic Acid, Poly Glutamic Acid, pyrrolidone carboxylic acid etc.
Skin Moisturizing,Cosmetic Grade Sodium Hyaluronate,High Molecular Hyaluronic Acid,Hyaluronic Acid Powder
Hunan Insen Biotech Co., Ltd , https://www.insenhealth.com