Introduce the steps to use the vegetable washing machine

The fruit and vegetable washing machine adopts the water bath type bubble cleaning, and the churning effect produced by the material in the water through the bubble release process is that the material has an irregular strong material turning movement in the water, and the surface of the object to be cleaned is effectively separated by the movement of the material, and the simulation is performed. The manual cleaning action, meanwhile, due to the tumbling motion of the material in the steam-water mixture, effectively avoids the damage of materials such as scratches and scratches generated during the cleaning process, improves the work efficiency, and changes the manual work to mechanical processing. Suitable for all kinds of fresh fruits, vegetables, pickled vegetables, fungi, seafood. The vegetable washing machine adds a spray cleaning function during the material conveying process, so that after the finished steam washing, the material is sprayed and cleaned, and the function of the process is to replace the dirty water on the surface of the material to improve the cleaning of the material. The effect is that the external cleaning spray water is used for secondary cleaning of the material, and the water automatically flows into the water tank to replace the cleaning water in the supplementary water bath, thereby maintaining the cleanliness of the water in the water bath, that is, improving the function of the washing water. The rate increases the cleaning effect.

Vegetable washing machine operation steps

1) Clean the water tank and fill it with water; inject water into the main tank until the overflow overflows.

(2) Start the conveyor belt with the motor to make the belt belt run normally and the direction is correct;

(3) Start the vortex pump and inject air into the water tank to make the water in the tank tumbling;

(4) Open the spray pipe valve so that the water is evenly sprayed on the mesh belt;

(5) Check each operating part and make sure it can work after normal operation.

(6) Depending on the degree of cleaning of the material, it can be cleaned separately before the mesh belt is transported.