Main features of stainless steel pneumatic diaphragm pump:
1. The stainless steel diaphragm pump does not need to be irrigated, the suction stroke is up to 7m, the lift is up to 50m, and the outlet pressure is ≥6kgf/cm2;
2, the flow is spacious and the performance is good, allowing the maximum particle diameter to reach 10mm. When pumping mud and impurities, the pump wears little;
3. The head and flow of the stainless steel diaphragm pump can be adjusted steplessly by the opening of the valve (the air pressure is adjusted between 1-7kgf/cm2);
4, no rotating parts, no shaft seal, the diaphragm will completely separate the pumped medium from the moving parts of the pump and the working medium, and the transported medium will not leak outward. Therefore, when pumping toxic, easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety;
5. The pneumatic diaphragm pump does not need electricity, and it is safe and reliable to use in flammable and explosive places.
6. The pneumatic diaphragm pump can be immersed in the medium to work;
7. The stainless steel diaphragm pump has convenient function and reliable operation. It only needs to open and close the gas valve simply by opening and closing. Even if there is no medium running or sudden stop due to unexpected conditions, the pump will not be damaged, and it will not be overloaded. The pump will automatically stop and have self-protection performance. When the load returns to normal, it will start automatically.
8. The stainless steel diaphragm pump has a simple structure and few wearing parts. The pump has a simple structure, convenient installation and maintenance, and the medium conveyed by the pump does not come into contact with the valve, the linkage and other moving parts, unlike other types of pumps due to the rotor, The wear of pistons, gears, blades and other components causes the performance of the stainless steel pneumatic diaphragm pump to gradually decrease;
9, stainless steel diaphragm pump can transport a more viscous liquid (viscosity below 10,000 centipoise);
10. The stainless steel diaphragm pump does not need to be lubricated with oil. Even if it is idling, it has no effect on the pump. This is a major feature of the diaphragm pump.
Stainless steel pneumatic diaphragm pump application field:
1, stainless steel pneumatic diaphragm pump can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
2, absorb paint, gum, pigments.
3, adhesives and glue, all types can be pumped.
4, a variety of tiles, porcelain, bricks and pottery glaze.
5. After drilling the oil well, pump the sediment and grout with a pneumatic diaphragm.
6. Aspirate various emulsions and fillers.
7, sucking all kinds of sewage.
8. For the tanker, the barge clears the tank to absorb the sewage.
9, hops and fermented powder slurry, syrup, sugar dense.
10. Water in mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.
11, stainless steel diaphragm pump pumping a variety of rubber slurry.
12, pneumatic diaphragm pump can absorb a variety of abrasives, corrosives, oil and mud, cleaning grease and general containers.
13, pneumatic diaphragm pump can absorb a variety of highly toxic, flammable, volatile liquids.
14, stainless steel pneumatic diaphragm pump a variety of strong acid, alkali, strong corrosive liquid.
15, the temperature can withstand 150 ° C.