After entering October, a series of vegetable problems will follow one after another, such as cucumber gum and tomato cracking. The emergence of these problems is mainly caused by the excessive temperature difference between day and night in the shed and the drastic changes in the dry humidity and the failure to adjust the shed management measures in time. Some vegetable farmers will ask, hasn't it been advocated to "widen the temperature difference for high yield"? Now is the good time, why is it not working? Temperature difference refers to the appropriate temperature difference, about 10 degrees Celsius to 15 degrees Celsius, more than 15 degrees Celsius will affect the normal growth of vegetables. Take cucumber as an example. When the temperature difference between day and night exceeds 20 degrees Celsius, the accumulation of organic nutrients increases, and the growth of the flesh is fast, but the growth of the skin is slow, and the skin is broken, forming some small cracks and flowing out of rubber particles.
Therefore, vegetable farmers should do the following 4 points in time according to weather changes.
1. Reasonable ventilation and control the temperature difference between day and night.
Do not ventilate before and after day and night. At night, you need to close the air vent properly or pull a small air vent to avoid low night temperature, resulting in excessive temperature difference between day and night. At present, the relative humidity in the shed is very high, and the fruit surface and leaves are prone to condensation. In addition, there are more windy weather in autumn. If there is more dew on the fruit surface, if the wind is suddenly released in the morning, the fruit surface moisture will evaporate quickly and the dry humidity will change too quickly, which will cause the fruit surface to crack or even crack the fruit. Therefore, it is possible to take early release and gradually increase the volume of air to prevent it during the day.
2. Water to flush fertilizer at the right time to control the humidity in the shed.
According to the soil moisture in the shed, it is necessary to topdress and water in time to ensure that it is not too dry or wet, not too much water and too much fertilizer, "small water and frequent watering" is better, and try to avoid uneven droughts and floods to prevent the occurrence of cracking. Watering and fertilizing can be selected in the sunny morning, and the wind can be released in time to avoid high temperature and humidity in the shed and prevent the occurrence of diseases. In the fruiting period, the main fertilizer is high-potassium water-soluble fertilizer. In order to avoid premature aging of yellow leaves, the nitrogen-phosphorus-potassium balanced water-soluble fertilizer is flushed with two water intervals. If the plant growth is weak, it can be combined with chitin, amino acid and other root fertilizers to restore the plant growth as soon as possible.
3. Pay attention to the concentration and timing of spraying to prevent disease.
In autumn, while spraying to prevent disease, you should also pay attention to the concentration and time. If the temperature is too high when spraying or the spraying time is scheduled at noon, the liquid will evaporate quickly, and the concentration of droplets remaining on the fruit surface will increase rapidly, and the peel is easy to crack, resulting in cracked fruit. Therefore, spraying can be done in the morning after the fruit noodles are dew, try to avoid spraying at noon high temperature.
4. Add boron and calcium fertilizers to the leaves to enhance the crack resistance of the fruit.
As the temperature difference between day and night increases, tomatoes, cucumbers and other vegetables are prone to cracking. It is recommended to spray foliar fertilizers containing trace elements such as boron and calcium regularly to increase the toughness of the fruit cell wall and prevent fruit cracking or cracking.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
When installing security Outdoor Camera, you should first choose the monitoring host. Do you want to add a monitoring card to your computer, or do you want to use an embedded hard disk recorder as your monitoring host. The computer monitoring card is more suitable for places that are familiar with computer installation, have professional personnel on duty, and have more functional requirements. Its overall investment is relatively low. Since the monitoring card is installed in the computer, the computer needs to be started 24 hours a day; As for the latter, it does not require professional knowledge, nor does it need to be on duty, and it is relatively simple to operate.
To install security monitoring equipment, it is necessary to determine how many cameras are installed, and the quality and monitoring range of the cameras are affected. It is preferred to determine how many cameras are used for monitoring, and then determine the camera lens monitoring range according to how many cameras are available. Therefore, the distance from the camera to the monitoring point and the monitoring area must be clear. The infrared supply network recommends using the camera of 480 TV line, because it is more in line with that definition.
When installing security monitoring equipment, the third consideration is whether the camera has night vision function. If the monitoring is installed in a dark place, it is necessary to consider using a camera with infrared night vision function.
The security monitoring equipment can be installed via wired or wireless transmission. Although the cost of wireless network is relatively high, it can save a lot of installation trouble and make the monitoring site more beautiful. However, the installation of wireless network monitoring equipment should take into account the environmental problems of security sites. Cement building materials will shorten the wireless transmission distance, and metal building materials may complete the shielding of wireless signals. The infrared transmitter and infrared receiver should be far away from other appliances to avoid interference. Because the price of wireless network is almost twice that of wired transmission monitoring equipment, I suggest using wired transmission installation.
On site monitoring and network monitoring When determining the installation of the monitoring system, you should consider whether you need network functions. That is, if you need to monitor and control the monitoring site on the Internet at any time, you need to select a monitoring host with network functions. Avoid no network transmission function after installation.
A complete security monitoring equipment should at least have three parts: surveillance camera, PTZ and decoder. The following are their installation methods:
Outdoor Network Wireless Camera,Network Wifi Camera,4g Outdoor Solar Powered Camera,Solar 4g Cameras,Solar Powered Cctv Camera
Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcameras.com