In recent years, the phenomenon of fertilizer damage in vegetable protection areas has been more serious, mainly because the protected land is in a relatively confined environment. Gases such as ammonia and nitrous acid produced from fertilizer damage cannot be effectively spread out; Fertilizers, but also the lack of rain and a large number of irrigation leaching, resulting in a large number of these fertilizers accumulated in the soil, causing physiological disorders of vegetables. The main manifestations were individual plants with poor root development, less new roots, brown roots, water-soaked leaves above the ground, and yellow-white or light-brown leaf color. After analyzing the symptoms and causes of fertilizer damage, the following measures can be taken:
First, balanced fertilization. According to the demand for nutrients at different stages of vegetable growth, nitrogen, phosphorus and potassium should be used for balanced fertilization. Nitrogen fertilizer should be applied to reduce nitrogen, stabilize phosphorus, and increase potassium. Organic fertilizer, NPK, and trace elements and fertilizers should be applied together.
Second, increase the use of fully cooked organic farmyard fertilizers to improve soil fertility. Organic manure is applied in vegetable fields. Organic colloids are formed during the decomposing process. Organic colloids have strong adsorption ability to cations. When chemical fertilizers are applied to soil, cations are mostly adsorbed by colloids, so the concentration of soil solution will not rise. Too high can increase the buffer capacity of soil nutrients and greatly reduce the possibility of fertilizer damage.
Third, control the amount of fertilizer to moderate level is appropriate. As long as the amount of chemical fertilizers is controlled, the fertilizer damage will be greatly reduced. Generally, ammonium bicarbonate should not exceed 30 kg per 667 square meters, and urea should not exceed 10 kg.
Fourth, promote deep-applied, stratified application of all methods, should not be spread on the surface to achieve the integration of soil and fertilizer, fertilizer evenly distributed in the entire cultivation layer. Acupuncture points should be more than 10 cm from the roots of the crop. At the same time, pay attention to fertilization to properly water, keep the soil moist, reduce the solution, to avoid concentration damage.
Fifth, the application of granular fertilizer. At present, there are many compound or mixed grain fertilizers, some of which contain about 15% of nitrogen, phosphorus and potassium, some of which are 10% and so on, which is the so-called nitrogen, phosphorus and potassium ternary compound fertilizer. This fertilizer is often in the form of granular fertilizer. Although the total nutrients of granular fertilizers are large, most of them change from quick-acting to slow-acting. The particles need to be softened in the soil, and the nutrients are gradually released. This avoids suddenly causing high concentrations of soil solution and burns the root system.
First, balanced fertilization. According to the demand for nutrients at different stages of vegetable growth, nitrogen, phosphorus and potassium should be used for balanced fertilization. Nitrogen fertilizer should be applied to reduce nitrogen, stabilize phosphorus, and increase potassium. Organic fertilizer, NPK, and trace elements and fertilizers should be applied together.
Second, increase the use of fully cooked organic farmyard fertilizers to improve soil fertility. Organic manure is applied in vegetable fields. Organic colloids are formed during the decomposing process. Organic colloids have strong adsorption ability to cations. When chemical fertilizers are applied to soil, cations are mostly adsorbed by colloids, so the concentration of soil solution will not rise. Too high can increase the buffer capacity of soil nutrients and greatly reduce the possibility of fertilizer damage.
Third, control the amount of fertilizer to moderate level is appropriate. As long as the amount of chemical fertilizers is controlled, the fertilizer damage will be greatly reduced. Generally, ammonium bicarbonate should not exceed 30 kg per 667 square meters, and urea should not exceed 10 kg.
Fourth, promote deep-applied, stratified application of all methods, should not be spread on the surface to achieve the integration of soil and fertilizer, fertilizer evenly distributed in the entire cultivation layer. Acupuncture points should be more than 10 cm from the roots of the crop. At the same time, pay attention to fertilization to properly water, keep the soil moist, reduce the solution, to avoid concentration damage.
Fifth, the application of granular fertilizer. At present, there are many compound or mixed grain fertilizers, some of which contain about 15% of nitrogen, phosphorus and potassium, some of which are 10% and so on, which is the so-called nitrogen, phosphorus and potassium ternary compound fertilizer. This fertilizer is often in the form of granular fertilizer. Although the total nutrients of granular fertilizers are large, most of them change from quick-acting to slow-acting. The particles need to be softened in the soil, and the nutrients are gradually released. This avoids suddenly causing high concentrations of soil solution and burns the root system.
Cixi Air-Fluid Teflon Washer Fitting is a new featured products introduced by Cixi Air Fluid Company ,which can be interchanged with BSPP ,BSPT & NPT Threads ,Non Leakage.
Teflon Washer with the most uprising characteristics as below:
A.Resistant to many chemicals, includes ozone, chlorine, acetic acid, ammonia, sulfuric acid and hydrochloric acid.
B.Weather and UV resistance
C.Non Stick::Very few solid substances will permanently adhere to a Teflon coating. While tacky materials may show some adhesion, almost all substances release easily.
D. Outstanding performance at extreme temperatures to meet your special temperatures 'demands: it can temporarily withstand temperatures of 260C and cryogenic temperatures of -240C and still with the same chemical properties. Its initial melting point of 342C (+- 10C) & second melting pint at 327C (+- 10C).
E:The Teflon Washer Series Fittings with Class-A O-ring ,The FKM O-RING available for special required .
Teflon Washer Metal Push in Fittings
Teflon Washer Metal Push In Fittings, Pneumatic Metal Teflon Washer, Teflon Washer Metal
Ningbo Air-Fluid Pneumatic Components Co., Ltd , https://www.air-fittings.com