1, the engine water temperature should be maintained at 85 - 95 °C. This section has the highest thermal and thermal efficiency and consumes the least amount of fuel.
2, to avoid the engine idling or idle speed. If you park for more than 5 minutes, you should stop.
3, try to work under full load. If the load is insufficient, high-grade small throttles should be used. Avoid overloading operations.
4. The exhaust pipe should not be arbitrarily lengthened or changed in order to avoid increasing exhaust resistance.
5, eliminate fuel leakage, test fuel consumption regularly on the engine, and install the oil correction device. Oil brakes, oil return pipes, etc. can also be used.
6. Conduct comprehensive inspection and maintenance before the operation to prevent sick operation. The wheels of the agricultural machinery shall act on the sheaves that are in line with the V-belt to avoid slippage and fuel consumption.
7, a reasonable choice of work stalls, so that fuel has been in full combustion. Throttle should be selected for economic work position, so that the engine does not emit black smoke. If the engine emits black smoke, the gear should be lowered appropriately.
8. Grasp the technical essentials of clutch shifting with two feet to avoid parking shifts. Do not suddenly increase or decrease the throttle during driving.
9. When driving, use as little brake as possible to reduce power consumption. To properly select the traction load, neither overload, nor "big horse-drawn cars," and not empty cars.
10. To maintain a high tire pressure, the inflation pressure of the tire should be higher than the specified value by 1-1.5 kg/cm2, but do not exceed the maximum pressure.
11. Choose the right tire pressure and size. The air pressure of the Dongfeng-12 type hand tow should be 1.6 kg-2 kg/cm2. It is best to choose a drive tire with a tire section width greater than the height.
12. The oil should be added close to the height of the dipstick, but do not exceed the mark.
13, regular maintenance of air filter, do not cover the air filter with cloth or debris.
14, correct adjustment of the rotating parts of the clearance and the traction machine is the gap and the traction clearance.
15, after the new machine or overhaul should be run in accordance with the provisions of the trial run; the correct use of lubricants, winter and summer should be replaced with different viscosity of the lubricant.
Chinese walnut kernel
A walnut is the nut of any tree of the genus Juglans. Technically a walnut is the seed of a drupe or drupaceous nut, and thus not a true botanical nut. It is used for food after being processed while green for pickled walnuts or after full ripening for its nutmeat. Nutmeat of the eastern black walnut from the Juglans nigra is less commercially available, as are butternut nutmeats from Juglans cinerea. The walnut is nutrient-dense with protein and essential fatty acids.Our Chinese walnut is grown in Xinjiang province of China. The output of it increases 33.33% this year.
Chinese Walnut Kernel,Raw Walnuts,Walnut Kernel,Walnut Without Shell
Ningxia Shun Yuan Tang Herbal Biotech Co., Ltd. , http://www.nxshunyuantang.com