3D mixer cleaning and maintenance standards:
1. Open the 3D mixer door and the door, blow it with the air pipe, and blow off the surface dust and accumulated material.
2. Unplug the 3D mixer or bend the air tube to ensure that no air is passed to the mixer. (In the case that the warehouse door is open, the accumulated material that will be cleaned up will fall off and be ventilated, otherwise the mixing opportunity will automatically close the door)
3. Fix the fan in the door and blow it in. The three-dimensional mixer worker should wear long pants and the skin should not be exposed! Wear a helmet and a mask. There must be two people in the staff, and one person enters one person to help.
4. Enter the 3D mixer, first remove the nozzle with a wrench, and blow it off with air. Then use a shovel to shovel the material on the wall and the blades. (Shovel homemade, welded to the iron pipe with iron pieces according to the size of the mixer, grinding the iron side on the side)
5. According to the need, the blade can be turned manually to clean the dead corner. Install the nozzle after cleaning.
In the work, the 3D mixer is operated correctly to ensure the smooth progress of the work and the safety of the employees.
The three-dimensional mixer reducer must be renewed every three months and used frequently. When replacing, the gear unit should be cleaned and new oil added.
The inspection site is a worm gear, a worm, a bearing, and an oil seal. The machine is regularly inspected 1-2 times a month. Whether the running parts are flexible, whether the fasteners are loose, and abnormal conditions should be dealt with in time.
If the machine is found to be vibrating abnormally or emit an abnormal sound, use it during use. The inspection should be stopped immediately.
The fault should be repaired in time. Electrical control parts should be kept clean and sensitive.
When the mixing slurry is assembled and disassembled, it should be lightly disassembled, stabilized and lightly placed to avoid deformation and damage.
The residual material of each part of the three-dimensional mixer should be cleaned and used after the end. It is necessary to wipe all the three-dimensional mixer cleanly, and the surface of the machine is coated with anti-rust oil, which is covered with a tarpaulin.
Disposable Piercing Guide - WPTC15
Laparoscopic instruments are medical devices used in minimally invasive procedures. These instruments are designed to be inserted through small incisions in the body, allowing surgeons to operate with less pain, scarring, and recovery time than traditional open surgery.
Advantages of Laparoscopic Instruments:
1. Smaller incisions: Laparoscopic instruments allow the use of smaller incisions, reducing scarring, pain and recovery time.
2. Improved visualization: Laparoscopic instruments provide a better view of the surgical site, allowing for more precise and accurate surgical procedures.
3. Reduced risk of infection: Compared with traditional open surgery, laparoscopic surgery usually has a lower risk of infection.
4. Reduced blood loss: Laparoscopic instruments are designed to minimize tissue trauma, thereby reducing blood loss during surgery.
5. Faster recovery: Compared with traditional open surgery, laparoscopic surgery usually has a faster recovery time, allowing patients to return to normal activities sooner.
Disposable Use Puncture Guider,All Laparoscopic Instruments,Keyhole Surgery Instruments,Surgical Laparoscopic Machine
Changzhou Weipu Medical Devices Co., Ltd. , https://www.wmlaparoscopic.com