Super water bath thermostat mixer EMS-20 double row four holes, what work precautions in the experiment use:
1. Place the water bath agitator on a horizontal workbench.
2. Who will fill the water from the upper part of the studio, the water level shall not be lower than the lowest water level (the lowest water level is the water level of the U-shaped heating pipe in the intruding working chamber)
3. Place the larger one of the spare parts stirrer into the center of the studio (with a circular mark). The instrument ensures that the water temperature at each point in the studio is consistent and there is no temperature difference.
4. The power supply is connected to the 220V power socket, the power switch is turned on, the indicator light is on, the stirrer in the center of the bottom of the studio rotates, and the meter displays the temperature of the studio. The green light on the temperature control meter is warming up, the red light is warming, and the alternating traffic light is constant temperature. If there is an error between the displayed temperature and the set temperature, adjust the “RST†knob as appropriate.
5. Place the beakers (up to four) containing the solution and stirrer in the previous four wells. Slowly adjust the bottom speed control knob of the instrument to the desired speed.
6. Do not allow water to flow into the electrical control box to prevent danger. When not in use, drain the water in time to keep the inside of the box clean.
7. Ask the manager to check the water level in the workroom. The water level is not the lowest water level in the area (the lowest water level is higher than the high end of the U-shaped heating tube of the studio). Do not lack water or burn the water in the workroom.
Pay more attention to the points, improve work efficiency, and strengthen protection to extend the service life of equipment.
Tianjin Uno Instrument Co., Ltd. constant temperature water bath mixer.
1. Place the water bath agitator on a horizontal workbench.
2. Who will fill the water from the upper part of the studio, the water level shall not be lower than the lowest water level (the lowest water level is the water level of the U-shaped heating pipe in the intruding working chamber)
3. Place the larger one of the spare parts stirrer into the center of the studio (with a circular mark). The instrument ensures that the water temperature at each point in the studio is consistent and there is no temperature difference.
4. The power supply is connected to the 220V power socket, the power switch is turned on, the indicator light is on, the stirrer in the center of the bottom of the studio rotates, and the meter displays the temperature of the studio. The green light on the temperature control meter is warming up, the red light is warming, and the alternating traffic light is constant temperature. If there is an error between the displayed temperature and the set temperature, adjust the “RST†knob as appropriate.
5. Place the beakers (up to four) containing the solution and stirrer in the previous four wells. Slowly adjust the bottom speed control knob of the instrument to the desired speed.
6. Do not allow water to flow into the electrical control box to prevent danger. When not in use, drain the water in time to keep the inside of the box clean.
7. Ask the manager to check the water level in the workroom. The water level is not the lowest water level in the area (the lowest water level is higher than the high end of the U-shaped heating tube of the studio). Do not lack water or burn the water in the workroom.
Pay more attention to the points, improve work efficiency, and strengthen protection to extend the service life of equipment.
Tianjin Uno Instrument Co., Ltd. constant temperature water bath mixer.
The greenhouse support line is used for the plant that stands tall on its own. The support will keep your plants healthy and upright. This economical and efficient support system will wow you.
Retaining the plant stems within the spiral sections, allows secure support without restriction. This gives the plant freedom of movement and encourages air circulation, helping to prevent fungal diseases and promoting strong stem growth. Supporting "Asters to Zinnias" has never been so easy!
Greenhouse Support Line,Greenhouse Support Wire,Greenhouse Plant Support Line,Greenhouse Plant Wire
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.thgreenhouse.com