1. Keep seeding in late April or late August. After going hay down in the field, select good strains with the typical characteristics of the variety, move them to the reserved land, and plant them at a row spacing of 2010 cm. Digging at the beginning of winter can get 70-80% white new rhizomes. In the middle and early June, the old stalks of the stolons or plants in the lower part of the plants with good characteristics can be used for rapid propagation. The stems produced by these two methods are the rejuvenating stems. The stalks of 1 mu of planting land can be used for 5-6 mu of each strain.
2. Harvesting is generally harvested twice a year. For the first time (top knife) in late June to early July, no later than mid-July, otherwise affecting the second harvest. The second time (two knifes) was performed before flowering in early October. Harvesting should be carried out on a sunny day from noon to 2 pm, when the leaves contain oil and the highest amount of brain.
3. After processing and harvesting, spread out and dry for 2 days, tie it into small pieces and hang it to dry or dry it. When the sun must be turned frequently to prevent rain, night exposed, or easy to mold deterioration. Drying rate 25%. The local processing equipment can be used to process peppermint oil by distilling the spearmint leaves and leaves with water vapor and water distillation. Crystals precipitate after cooling, and menthol can be obtained after isolation and purification.
2. Harvesting is generally harvested twice a year. For the first time (top knife) in late June to early July, no later than mid-July, otherwise affecting the second harvest. The second time (two knifes) was performed before flowering in early October. Harvesting should be carried out on a sunny day from noon to 2 pm, when the leaves contain oil and the highest amount of brain.
3. After processing and harvesting, spread out and dry for 2 days, tie it into small pieces and hang it to dry or dry it. When the sun must be turned frequently to prevent rain, night exposed, or easy to mold deterioration. Drying rate 25%. The local processing equipment can be used to process peppermint oil by distilling the spearmint leaves and leaves with water vapor and water distillation. Crystals precipitate after cooling, and menthol can be obtained after isolation and purification.
Our small port has a good sealing ability and stable chemical properties. The excellent chemical resistance,heat resistance and good compatibility with the Drugs give us a guarantee to use the products safely. From the input to the output, the products go through a series of professional tests and strict quality controlling procedure. The joint is produced in the clean plant with the whole working plant reaching to Class 10000, and some even for Class 100 million grade. Our workshops are designed which meet the GMP standard.
Small Port,Small Dual Port,Small Single Port,Small Round Ports
SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com