Shanghai Hao Machinery Equipment Co., Ltd. is located in the economic center of China and an important port city - Shanghai, located in the Jiuting Economic Development Zone of Songjiang District. The company specializes in the development, production and sales of packaging machinery, round bottle labeling machine, self-adhesive labeling machine, double-sided labeling machine, automatic capping machine, counting machine, filling machine, sealing machine and service integration. Modern high-tech enterprise. The company introduces advanced Taiwan technology and has a group of exquisite technical teams to study and create high-quality products. The products are sold to the three provinces around Shanghai and exported to Europe, America, Middle East, Southeast Asia and other countries in the world. Widely used in daily chemicals, food, medicine, cosmetics, health products, electronics, hardware, stationery and other industries. Since its inception, the company has been pursuing high-quality high-end products and Zui perfect after-sales service, always put the company's brand effect in the * position, and constantly innovate, the company has also achieved very good social effects while growing. The main products produced by the company are: self-adhesive labeling machine: automatic vertical/horizontal labeling machine, round bottle labeling machine, fixed-point round bottle labeling machine, single/double-sided labeling machine, multi-function Fully automatic flat labeling machine, desktop semi-automatic flat/round bottle labeling machine, automatic high-speed sleeve labeling machine, wind/steam shrinking machine, etc. All equipment can be equipped with a hot stamping machine / small character printer. All equipments are provided with non-standard customized solutions to meet all different custom requirements! Online wiring scheme is hot this season! ! ! All electrical components of the factory are purchased from internationally renowned brands, and each piece is processed by fine processing. The labeling machine has stable performance, high precision and fast speed!
Labeling machine mainly includes: self-adhesive labeling machine, sleeve labeling machine, round bottle labeling machine, beer labeling machine, semi-automatic labeling machine, labeling machine, automatic labeling machine, automatic labeling machine, labeling machine , automatic labeling machine, hot melt adhesive labeling machine. These products can be flat-paneled, single-sided or multi-faceted packaging, cylindrical paste, partial or full-covering cylinder paste, dents and corners, etc. If you want the labeler to last longer, then we To take good care of the labeling machine, pay attention to the maintenance of the labeling machine. Maintenance tips for labeling machines:
1. Adjustment of the brushing device
The center of the brush is aligned and the two sides are symmetrical. The brush is perpendicular to the surface of the container. The overlapping gap of the brushing sweeping container is: a single pressing brush is 10 mm to 15 mm, and the combined pressing brush is 5 mm to 10 mm. The position of the cleaning brush from the sponge is 1 mm to 2 mm. Adjustment of the bottle head. The bottle head should be 20mm lower than the bottle when there is no bottle.
2. Adjustment of the label box
The center line of the standard box, the center axis of the standard station is tangent to the label paper, and the center axis of the target board is lined up at three points. The adjustment target board is tangent to the label paper (0 distance), and then the standard box is moved closer to 1 mm to 2 mm. The gap between the standard paper and the bead on both sides should be between 0.8mm and 1mm. The gap is too large, causing the standard paper to shift in the standard box, and the oblique mark appears. If the gap is too small, the push mark will be poor. The adjustment of the position of the labeling hook of the standard box: the upper and lower and the left and right grasping hooks are on the same vertical plane and evenly work on the standard paper, so that the label can be smoothly captured. Adjustment of the label supply roller: When there is no label, the label platen can be pressed to the front end of the label box and the label near the label hook finger cannot be crushed.
3. Adjustment of the standard station
Adjustment of the squeegee and the rubber roller: The squeegee and the rubber roller should not have a gap over the entire length. If there is a gap, the squeegee can be adjusted by adjusting the eccentric bolt. Adjustment of the rubber roller and the target plate: the target plate and the rubber roller only contact each other without any pressure. If the gap is too large, the glue on the label will be too much, causing the glue. The gap is too small, the contact is too tight, the glue will be squeezed away, and there is no glue on the half of the target. Practice has proved that the gap between the target plate and the rubber roller is between 0.1mm and 0.2mm. This can be achieved by adjusting the bearing housing in the lower part of the rubber roller and adjusting the bearing on the upper part of the rubber roller if necessary.
4. Adjustment of the bottle star wheel, the bottle star wheel, and the bottle screw
When adjusting the inlet and outlet star wheels and the feeding screw, the pressure head of the labeling machine shall prevail. First adjust the bottle into the star wheel. When the bottle head just overwhelm the bottle, adjust the bottle into the star wheel so that the bottle is in the middle of the star wheel groove. Adjustment of the inlet screw: According to the inlet star wheel, when the bottle is in the middle of the groove of the inlet star wheel, adjust the auger so that the auger is pressed against the bottle side without displacement. Adjustment of the bottle star wheel: When the bottle head has just been lifted, adjust the star wheel so that the bottle is in the middle of the groove of the star wheel.
Labeling machine mainly includes: self-adhesive labeling machine, sleeve labeling machine, round bottle labeling machine, beer labeling machine, semi-automatic labeling machine, labeling machine, automatic labeling machine, automatic labeling machine, labeling machine , automatic labeling machine, hot melt adhesive labeling machine. These products can be flat-paneled, single-sided or multi-faceted packaging, cylindrical paste, partial or full-covering cylinder paste, dents and corners, etc. If you want the labeler to last longer, then we To take good care of the labeling machine, pay attention to the maintenance of the labeling machine. Maintenance tips for labeling machines:
1. Adjustment of the brushing device
The center of the brush is aligned and the two sides are symmetrical. The brush is perpendicular to the surface of the container. The overlapping gap of the brushing sweeping container is: a single pressing brush is 10 mm to 15 mm, and the combined pressing brush is 5 mm to 10 mm. The position of the cleaning brush from the sponge is 1 mm to 2 mm. Adjustment of the bottle head. The bottle head should be 20mm lower than the bottle when there is no bottle.
2. Adjustment of the label box
The center line of the standard box, the center axis of the standard station is tangent to the label paper, and the center axis of the target board is lined up at three points. The adjustment target board is tangent to the label paper (0 distance), and then the standard box is moved closer to 1 mm to 2 mm. The gap between the standard paper and the bead on both sides should be between 0.8mm and 1mm. The gap is too large, causing the standard paper to shift in the standard box, and the oblique mark appears. If the gap is too small, the push mark will be poor. The adjustment of the position of the labeling hook of the standard box: the upper and lower and the left and right grasping hooks are on the same vertical plane and evenly work on the standard paper, so that the label can be smoothly captured. Adjustment of the label supply roller: When there is no label, the label platen can be pressed to the front end of the label box and the label near the label hook finger cannot be crushed.
3. Adjustment of the standard station
Adjustment of the squeegee and the rubber roller: The squeegee and the rubber roller should not have a gap over the entire length. If there is a gap, the squeegee can be adjusted by adjusting the eccentric bolt. Adjustment of the rubber roller and the target plate: the target plate and the rubber roller only contact each other without any pressure. If the gap is too large, the glue on the label will be too much, causing the glue. The gap is too small, the contact is too tight, the glue will be squeezed away, and there is no glue on the half of the target. Practice has proved that the gap between the target plate and the rubber roller is between 0.1mm and 0.2mm. This can be achieved by adjusting the bearing housing in the lower part of the rubber roller and adjusting the bearing on the upper part of the rubber roller if necessary.
4. Adjustment of the bottle star wheel, the bottle star wheel, and the bottle screw
When adjusting the inlet and outlet star wheels and the feeding screw, the pressure head of the labeling machine shall prevail. First adjust the bottle into the star wheel. When the bottle head just overwhelm the bottle, adjust the bottle into the star wheel so that the bottle is in the middle of the star wheel groove. Adjustment of the inlet screw: According to the inlet star wheel, when the bottle is in the middle of the groove of the inlet star wheel, adjust the auger so that the auger is pressed against the bottle side without displacement. Adjustment of the bottle star wheel: When the bottle head has just been lifted, adjust the star wheel so that the bottle is in the middle of the groove of the star wheel.
Sinoscope Set,Sinoscope Full Set,Sinoscope For Ent,Ent Nasal Endoscope
ZHEJIANG SHENDASIAO MEDICAL INSTRUMENT CO.,LTD. , https://www.shendasiaomed.com