Management requirements and operation management methods for boiling water and food: water for eating; density for chickens: the density of the first ten hours of the chicken is critical, generally 7080 per square meter, ie, the stocking density five days before brooding The principle of high-density feeding is that the characteristics of the chicks are to learn to rush to eat, just as the old hen teaches the chicks to eat. This is because they were passed down from the ancestors, so they are suitable for large-scale feeding. It helps all chickens learn to eat and they can eat as early as possible. The approach is to put all the brooding areas as open areas, spread on sacks or plastic cloths, use wet food to eat, mix the wet methods, humidity is in hand, release it and hold it. That is, broken is good, the water content is around. Sprinkle the material once every half hour. Sprinkle less and add more to drive the flock. Put all the water dispensers. The better the chicken is, the better it is to eat it in a shorter period of time. The result of this is that when the chicks enter the house for ten hours, the rate of satiation reaches 96%, and the rate of feeding on the broilers reaches 100%. The chickens that can’t feed and can’t drink are selected 100% and kept alone: A good practice is to put every 2025 chickens in a hatchery and put them in a small water dispenser and sprinkle them. And focus on them.
Tof(Time-of-flight), is JRT new product, which is a single-point LiDAR sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range. It's great for Unmanned Aerial Systems.Contact Us Now for data sheet.
Product Name | Tof LiDAR Sensor |
Model Number | IT02S-65-A/IT02S-65-B/IT03M-650 |
Measuring Range (without Reflection) | 0.1-12m/0.1-10m/0.1-15m(90% reflectivity) |
Place of Origin | China |
Accuracy | 2cm~4cm/5cm |
Blind Area | 10cm |
Resolution | 1cm |
Measuring Unit | centimetre |
Laser Class | Class II, red |
Laser Type | 650nm, <1mW |
Communication Interface | UART, 115200bps(default) |
Size | 46*17*7mm/50*26*13mm |
Weight | About 4g/10g |
Voltage | 2.7V~+3.6V |
Electrical Level | TTL/CMOS |
High Frequency | 100hz |
Operating Temperature | 0-40 ℃ (32-104 ℉ ) |
Storage Temperature | -25~60 ℃ (-13~140 ℉) |
ToF Sensor,Time of Flight Sensor,LiDAR Distance Sensor,ToF Distance Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserrangfinder.com