In order to make the new agricultural vehicle prosperous, here are the highlights of “Longevityâ€: After the new vehicle arrives at home, the fuel tank, gearbox, and rear axle are cleaned and replaced with clean fuel, lubricant and cooling. Water and add it as required. Carefully check whether the control mechanisms are flexible and reliable. Whether the fastening nuts of the fasteners, especially the front and rear axles, are tightened. For loose parts, tighten the fasteners according to the instructions. Check if the shift lever is in the neutral position, if it is not in neutral. In the position, the clutch pedal should be depressed and the shift lever should be set to neutral. Vehicles with self-dumping devices should check the handle of the dumper according to the requirements of the instructions and place it in a separate position. Ingeniously start the inspection, turn on the fuel switch and connect the oil circuit. After the engine is started, it should be run at a low speed for 3 to 5 minutes so that the water temperature can rise to about 50°C to start walking. Running-in adjustments Newly-purchased agricultural vehicles must be put into operation before they can be used normally. The running road requires a small gradient, the road surface is flat, the load is light to heavy, and the use of the gear is performed from low to high. Each gear must be worn in, and common gears should be run in more frequently. During the running-in period, the clutch, brake, and other working devices should be consciously used for a certain period of time. At the same time pay attention to the working conditions of each part, and adjust the parts that need to be adjusted. After the oil change is completed, all oil must be cleaned and replaced. Oil changing steps and methods are: first replace the engine oil, after parking, heat release gearbox, rear axle housing gear oil, and add the appropriate amount of diesel, use low gear for 2 to 3 minutes. Then wash and clean the diesel used for cleaning, and finally add the corresponding new lubricant to each part.
NVR Network Video Recorder
Tiandy network recorders are tailored to fit different applications. Ultra Series recorders offer the best performance and highest quality. Pro Series devices are perfect for mid-large size businesses and projects which require a balance between performance and budget. Lite Series recorders are designed for optimum cost performance with strict Dahua quality standards.
Tiandy network recorders are equipped with various video channel capacities and physical sizes to cater to various use cases. Up to 256CH/unit with 4U size is suitable for applications with high recording requirements but without additional IP storage to on save costs, such as in schools, casino, building complexes, etc. 4CH/unit small box recorders are typically used in applications at home or small businesses like retail shops.
Customer prefer keywords: NVR ,HDCVI NVR ,DVR, 4 channel dvr,8 channel dvr.16 channel dvr,nvr camera,etc.
Enhanced Pse Nvr,Nvr Network Video Recorder,24Hdd Nvr Network Video Recorder,160Ch Nvr Network Video Recorder
TD Cloud Security Co.Ltd , https://www.cctvcameraexpert.com