Tilapia breeding in winter and spring to prevent freezing injury

In addition to strengthening the feeding before the winter and before the cold current, during the winter, the feeding should be properly based on the weather and the tilapia production to ensure that the tilapia will not lose weight. Generally, 1 kg of peanut bran is to be distributed per 1 000 fish per day. Right and left in the earthen pond, but when the water temperature is below 20°C, the tilapia feed intake should be stopped. When the weather is sunny, the curtains can be opened to adjust and exchange the air in the pool; when the temperature drops, the cold current When you struck, you must do the following:

(1) The film should be thickened. Try to choose a good quality film and increase the film size. In addition, two layers of film are pulled on the windward side of the north to enhance the insulation capacity.

(2) The base of the greenhouse should be thickened, and the fixed stakes should be lengthened to 1.5 meters.

(3) It is best to pull the dense wire some tightly, and to tighten the film tension.

(4) When the cold air comes, groundwater should be added to keep the water depth more than 2 meters. Because the groundwater temperature is high and stable, the temperature of the culture pond can be increased to prevent frostbite.

(5) Add a stove in the wintering pool. When the water temperature drops to 13°C, boil the water with a wok so that the steam passes directly into the room. The chimney of the stove surrounds the wall of the wintering pool to increase the indoor temperature and thus control the water temperature. Or use the electric heating rod to heat the pool water in the wintering shed, or use a water heater to heat the tap water to spray the water surface, so that the tilapia can safely survive the winter.

Doing the above work strictly during wintering can create a good living environment for tilapia, prevent the occurrence of frost damage, and increase the breeding income.

Using the latest computer graphics and image technology, the patient is placed in a virtual environment, by picking technology, make the person can see on the screen or take the form of virtual figure, according to the change of scene and in the screen prompt to do all kinds of action, to keep the screen scene pattern continues, until finally complete the training goals.

Situational Rehabilitation Equipment

Occupational Therapy Equipment For Home,Ankle Joint Training Device,Shoulder Joint Convolution Training Apparatus,Situational Rehabilitation Equipment

jinan Fangqi Sunshine education consulting CO.,LTD. , https://www.fzrehabmarket.com