Water immersion method to dig a trench near the mushroom shed or wipe a pool with cement, and then put the bacteria bar in the pool, the surface pressure on the surface and other heavy objects to prevent bacterial bag surfaced, and then put the water to make the bag completely immersed in water, pay attention Add water in a timely manner to maintain the original water level, so that soaking water for 8 to 24 hours to make the bag water content of 70%.
The wall replenishment method tore off the plastic bag of the bacteria stick to 1/3, and then there will be a plastic bag out to the outside, two and one with the same masonry, separated by 15 cm in the middle. Be careful not to get too close to prevent the temperature from rising. Put a harder nutrient soil in the middle, between the layers and layers of soft soil nutrient mud, highly laid 12 layers below to avoid falling. On the masonry pool. After a tidal mushroom, make up the water.
The bag replenishment method strips all the plastic bags vertically and lays them horizontally in a width of 1 to 1.2 meters in the imperial fistula. The arrangement should be compact and fill in nutritious soil. The material surface should be covered with 1 to 2 cm thick, and it should be filled with water in Yangshuo. , so that the training material suck enough water, according to conventional methods of management.
SICHUAN UNIWELL BIOTECHNOLOGY CO.,LTD. , https://www.uniwellbio.com