Teaching and installation of high pressure tubing

Diesel engine oil pump and injector are generally connected by high-pressure oil pipe, because the cone at the end of the high-pressure oil pipe is subject to tensile stress for a long time, and high-frequency vibration occurs when the high-pressure fuel pipe is opened and closed with the needle valve during fuel injection. The joint is easily broken. Correct inspection, shaping, teaching and installation can extend the service life of high-pressure tubing. 1. an examination. Check whether the shape of the small cone at the two ends of the high-pressure fuel pipe is intact, and whether the shoulder at the intersection of the cone and the oil pipe is even. 2. Plastic. The two ends of the high-pressure fuel pipe are shaped so as to be matched with the connecting bolts of the injector and the injection pump. 3. Installation is taught. Tighten the oil tube fastening nut on the end of the fuel injection pump. At this time, the cone at the end of the fuel injector should be aligned with the conical point on the nozzle bolt. If the positive match indicates that the shape of the tubing is correct, the tubing must be reshaped until it is aligned, and tighten the tightening nut. 4. Fixed card installation. When installing the oil pipe, the fixing card should be installed first, and then fastened in place. Then, the above two ends should be alternately tightened to check the consistency between the small cone and the cone in the end of the high pressure oil pipe. If the pipe is installed at both ends and then fixed on the card, it will increase the stress on the high pressure pipe, so that the stress is concentrated on the shoulders of the cones at both ends, which can easily cause cracking.

Sunson Brewing Enzyme is developed for beer brewing. Using enzyme preparation in the beer production process can improve the proportion of the auxiliary materials, reduce the production cost and improve the flavor of beer. The fermentation degree can be improved by adding enzyme preparation before the fermentation or in the process of the saccharification. The deficiency of malt quality can be made up by adding enzyme preparation in the fermentation. The enzymes can reduce or stop the malt gelatinization, decrease the leaching of malt pigment, tannin and other impurities in  process of saccharification. Using enzymes in the process can also prevent beer turbidity and make beer clear and transparent. Sunson group provides 

Glucanase, Xylanase, Pullulanase, Neutral Protease, High-Temperature α-Amylase, Glucoamylase for brewing industry.

Benefits:
Increases fermentable carbohydrates
Produces highly attenuated beer in a cost-effective manner
Higher extract yield

This product should be stored in a cool and dry place in sealed container, avoiding insolation, high temperature and damp.  The product has been formulated for optimal stability. Extended storage or adverse conditions such as higher temperature or higher humidity may lead to a higher dosage requirement.

Enzyme preparations are proteins, which may induce sensitization and cause allergic type reactions in sensitized individuals. Prolonged contact may cause minor irritation for skin, eyes or nasal mucosa, so any direct contiguity with human body should be avoided. If irritation or allergic response for skin or eyes develops, consult a doctor.

Brewing Enzymes

Brewing Enzymes,Enzymes For Beer Brewing,Enzymes Used For Brewing,Brewing Enzymes For Beer Industry,Beer Industry Enzymes

Sunson Industry Group Co., Ltd , http://www.sunsonchinaenzymes.com