Vehicle maintenance to six defenses

Posted on

Anti-crushing When repairing a vehicle, the wheels must be secured with triangular wooden blocks or bricks. If jacks are used to lift the wheels, they should be supported firmly. When the jacks are put down, they should observe whether there are people or obstacles around. When inspecting the tubing of the hydraulic car, the tilted carriage can be firmly supported. Anti-scald engine is not allowed to operate when the engine is running. To repair it immediately after flameout, special precautions must be taken to prevent the exhaust pipe from scalding the human body. When the engine water temperature is high, it is not allowed to rush to open the tank cover to prevent the cooling water from running out of the scald. people. Anti-poisoning repair workshops often start the engine or frequently perform gas welding or electric welding operations. Indoors are easily filled with exhaust gas. Therefore, air circulation in the repair environment must be maintained to prevent chronic poisoning. Thoroughly clean the anti-explosion oil tank or tank before welding. In addition, Mars should be put out of the battery room to prevent the accumulation of hydrogen and oxygen in the overflow of the battery and in the event of Mars exploding. Fire Prevention No open flames are allowed during the repair of petrol vehicles. Petrol tanks, cotton yarn with waste oil and other wastes cannot be placed near the wheel. Electric shock-proof electrical equipment must be reliably grounded, and no leakage can occur at any location. Wire aging or bitten by rats should be replaced immediately.

Anion Sanitary Napkin with below size: 245mm, 280mm, 300mm, 320mm, 350mm, 400mm. It is with Anion, negative on and the ultra thin SAP paper absorbs liquid quickly and provides more protection.

The main material: Perforated non-woven topsheet,  USA fluff pulp, Japan Sumitomo SAP,  Tissue paper, Airlaid paper, Breathable PE film backsheet , release paper, anion chip


Function:

1)Soft and dry perforated or non-woven top sheet 

2)Wing type soft-dry cover is easy to prevent side leakage 

280mm

150ml

9g

10pieces/pack

300mm

180ml

9.5g

10pieces/pack

320mm

190ml

10g

10pieces/pack

350mm

220ml

11g

10pieces/pack

400mm

230ml

23g

10pieces/pack



SANITARY PAD STRUCTURE

  • 1st layer: Cottony smooth non-woven(better absorbency which give ultra comfort)
  • 2 ed layer: Woven cloth anion chip(which contains 6100 anion per cubic cm. It works naturally to  relieve menstrual discomforts)
  • 3 rd layer: Air-laid paper(360 degree tightly wrapped, not easy causes napkins deformities)
  • 4th layer: Super absorbent polymer(effectively blocks the water more than ten times, keep dry)
  • 5th layer: Professional diversion layer(can accelerate the liquid proliferate rapidly, is helpful to  flicker attracts, prevents the side to leak)
  • 6th layer: Air-lair paper(enhance freshness, provides maximum absorbency per sanitary pad)
  • 7th layer: Breathable PE film bottom layer(air ventilation)
  • 8th layer: Adhesive glue release paper)specially designed back adhesive which conforms to  human ergonomics)


Product show:

Anion sanitary towels  

sanitary pads

Anion Sanitary Napkin

Anion Sanitary Napkin,Negative Ion Sanitary Napkin,Anion Sanitary Napkin Pad,Anion Biodegradable Sanitary Napkin

Tianjin Jiao rou Sanitary product company , http://www.tjsanitary.com