1. After the puppies landed from the mother, the bitch snapped the umbilical cord and the body sucked the puppies clean. The puppies lifted the gauze and wiped it dry. The umbilical cord was left with a white centimeter and the umbilical cord was cut to disinfect the iodine.
2. If the baby is not breathing properly or does not breathe, he or she may swing his head downwards or poke the dog's nose with his mouth, spit out the water, and then perform artificial respiration, massaging the chest, and tapping.
3. With 0.5% glucose or vitamin ADEC droplets into the mouth of the puppies 0.5CC strengthen vitality.
4. Put the puppies in front of the udder of the bitch. (If the pups are not sucking, open the puppies' mouths with their hands and hold the teat slowly.)
5. Kuchu (milk milk on the first day - 17 days) is very important for puppies to allow puppies to absorb breastmilk and have a strong immunity of more than 75%, which can resist canine fever.
Day 3: The umbilical cord falls off.
Day 7: Excision of wolf toes.
Day 14: Eyes open.
Day 18: Learn to stand and walk.
Day 21: Deworming (for 3 consecutive days).
Day 25: Eyes can be seen and ears can be heard. Began to supplement milk powder, high protein, vitamins, calcium powder.
Day 30: Prepare for milk.
Day 35: Start your deciduous teeth and defecate yourself. The male's testicle slides into the scrotum.
Day 42: Injection of DA21 vaccine.
Day 50: Deworming.
Day 63: Injection of CPV vaccine.
Day 70: Strengthen the FV vaccine injection.
Day 90: DA2LT and PV vaccines are boosted.
August-October: The first estrus (bitch) dogs were given a full year of DA2L and PV vaccination. More than four months after a dog has been given rabies vaccine 2
1. Puppies: Feeding milk powder should be skimmed milk powder is better to avoid diarrhea.
2. Puppies: Avoid feeding = head rice, avoid stabbing gastrointestinal, and not easy to absorb.
3. Puppies: Do not eat foods with a higher content of crude fiber, or foods with too much fat.
4. Puppies: Insulate at night or in winter. Room temperature is 25 degrees.
5. The bitch must be dewormed before breeding.
6. Before the bitch is produced, the nipple is disinfected with iodine to avoid bacterial infection.
7. When bitches are suckling, they should add calcium powder, high protein, vitamin ADEC, supplement nutrition, and increase milk production.
8. The bitch is protected from outsider contact during production.
9. When the bitch is lactating, it is necessary to feed it manually every six hours.
10. Normal production of bitches is about 20-40 minutes each. When more than 60 minutes, the triggering needle, if injected. After two hours of production, she was admitted to the hospital to perform an emperor incision operation to remove the fetus (a small-scale dog bitch usually makes an imperial incision operation).
11. Bitch production micro-digestion: pregnant bitches about 62 days in the mating, suddenly no appetite restless, with their forefoot grip, this is the production of micro-mega.
* Childbirth: Turning back and forth, back arching, abdominal enlargement, struggling, exertion, this is pain, after the pain, then the genitals rose, the bitch sits straight and breaks the water, Mingdao will flow out like a balloon like yellow amniotic membrane which Wrapped in amniotic fluid, you can clearly see the head of the fetus, and then the shoulders, abdomen, fetus will fall. Third, healthy dog ​​farm management methods
(a) Environmental Control: 1. Site location: The main infection path of dog disease is mostly caused by direct and indirect contact with sick dogs or bacteria-infected dogs, causing infections. Therefore, the new dog farm should be kept away from other dog farms. The distance should be at least 50 feet, and it is better not to Located in the traffic arteries.
2. Fence: Around the dog farm, we must build a wall to isolate humans, dogs, and other animals from this group of dogs. It is best to have a double wall.
(b) Personnel control:
1. Deny visitors: If not necessary, try not to allow outsiders to enter the dog farm.
2. Special management: Canine employees must not work concurrently with livestock and veterinarians.
(c) Vehicle Control:
1. Outside feed vehicles, dog vans or other vehicles must not enter the dog farm.
2. After being used, foreign dogs and transport dogs are thoroughly cleaned and disinfected after each use.
(IV) Regulation of feeding and management operations:
1. All guests and employees entering the dog farm must go through the shower and change into uniforms and rubber shoes for the dog farm. After entering the field, they can be hand-washed and foot-sterilized.
2. Feeding management equipment must be disinfected before it can be brought into the dog farm.
3. Clean and disinfect the kennels and sports grounds regularly. (At least once a week).
4. Various preventive injections and deworming are carried out in due course.
Metatron Hunter 4025:
Description and Field of Application
Purpose
The Metapathia-GR Hunter software can operate only with the telemetric nonlinear analysis data processing apparatus "Metatron" and its subsequent modifications. The telemetric nonlinear analysis data processing device is compatible with the IBM-type PCs and intended for studying reaction of a biological object to different types of the informational impact. "Metatron" allows correlating the measurement process with the process affecting it and performs the following.
Operations:
1) It measures J (0) which mirrors the change of the describing parameter, and the entropic potential relative to its ini- tial value;
2) It transforms continuous signal J (0) with the preset intervals of frequencies into a histogram (a row of numerical val-ues of scanned frequencies with serial numbers from 1.8 to 8.2 Hz.);
3) It sends the current W values to PC and displays the graph on the monitor simultaneously with its impact on the examinee.
4) It accumulates the W value in its memory unit, if observing the histogram is more convenient upon completion of the measurements;
5) It issues the scale-correlated commands required for regulating the effect on the examinee at testing;
6) It transmits the W values from the unit into PC memory upon completion of the measurements and saves them in unit memory of prior to the beginning of recording data of the next measurements.
Telemetric nonlinear analysis data processing apparatus "Metatron" (hereinafter "apparatus") can be used for non-linear analysis of biological structures and testing of biologically active supplements. The apparatus can also be used in research centers and scientific research facilities.
The apparatus is intended to register psychophysics changes in system and allows to:
- Get qualitative estimation of functional condition in a form of topical analysis.
- Control effectiveness and results of different ways of treatment.
- Analyze dynamics of functional condition changes over period of time.
- Determine initial nidus of functional breach.
- Estimate character of changes using expert systems.
- Estimate basic characteristics of bio-system homeostasis.
Metatron Hunter 4025,Metapathia Gr Hunter 4025,Metatron 4025 Nls,Metatron Gr Hunter 4025
Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.nirlighttherapy.com