The universal pulverizer uses a movable knife and a fixed knife to rotate at a high speed in the pulverizing chamber. After the material is sheared and impacted, it is discharged from the lower discharge port, and the pulverization fineness can be changed by changing the sieve. The structure of the machine is simple, firm, stable, and the pulverization effect is good. The pulverized material can be directly discharged from the grinding chamber of the main machine, and the particle size is obtained by replacing the mesh screen with different apertures, and the machine is all stainless steel. The inner wall of the casing is machined to achieve a smooth surface, which changes the phenomenon of rough and powder accumulation on the inner wall of the previous model, making the production of medicines, food, chemicals and other products more in line with national standards and meeting the requirements of GMP.
The equipment is widely used in the pulverization of materials in the pharmaceutical, chemical, metallurgical, food, construction and other industries, and the production process continues. The processing of hard and difficult materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc., can also be used as a supporting equipment for the micro-grinder and superfine grinding machine. The powder collection room adopts a fully enclosed sound-absorbing structure, which can effectively reduce the working noise. The machine is equipped with a cooling device to reduce the machine temperature and make the work more stable. The motor speed of the machine is 5000 rpm. This machine is made of stainless steel and has strong wear and corrosion resistance. It is suitable for processing advanced and corrosive materials. The machine adopts the impact crushing method. After the material enters the crushing chamber, it is impacted by six movable hammers rotating at high speed. The ring gear and the material collide with each other to crush, and the crushed material enters through the mesh hole with the help of airflow. Powder bag, leaving no residue. It has the advantages of high efficiency, low noise, reliable performance and product quality, safe operation, low drug hygiene and low loss.
The operation and precautions of the equipment have the following points:
1. Before use, first check if all the fasteners of the machine are tightened and the belt is tight.
2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.
3. Check if the appliance is complete.
4. Check if there are any hard objects such as metal in the crushing room of the machine, otherwise it will break the * and affect the operation of the machine.
5. The material must be inspected for purity before pulverization. Metal hard materials are not allowed to be mixed in, so as to avoid hitting the knives* or causing burning accidents.
6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.
8. Regularly check if the same screen is damaged. If it is damaged, it should be replaced immediately.
9. When the machine body is used, there will be slight vibration. Be sure to tighten the cover connecting handle to avoid accidents.
Equipment maintenance:
1. Regularly check whether the fixing nut of the movable toothed disc is loose and all the fastening parts must not be loose. In particular, check the screws inside the fixed sprocket.
2. Lubrication: Wherever the oil cup is installed, the appropriate lubricating oil should be injected before starting the machine. For continuous work, the number of refueling should be increased appropriately. The actual working time is over 300 hours, and the new lubricating oil must be replaced after cleaning the spindle bearing cavity.
3. When replacing consumable parts and rolling bearings, pay attention to the use of technical screw holes. The operation is carried out by the repairman familiar with the machine. If the user's operation is difficult, it should be timely with the factory *, do not arbitrarily dismantle.
Have seen the sharing of the above small series enough, what are the precautions when operating the universal crusher and how to maintain it? Have you learned? I also hope that this article can help everyone.
The equipment is widely used in the pulverization of materials in the pharmaceutical, chemical, metallurgical, food, construction and other industries, and the production process continues. The processing of hard and difficult materials, including plastic, copper wire, Chinese herbal medicine, rubber, etc., can also be used as a supporting equipment for the micro-grinder and superfine grinding machine. The powder collection room adopts a fully enclosed sound-absorbing structure, which can effectively reduce the working noise. The machine is equipped with a cooling device to reduce the machine temperature and make the work more stable. The motor speed of the machine is 5000 rpm. This machine is made of stainless steel and has strong wear and corrosion resistance. It is suitable for processing advanced and corrosive materials. The machine adopts the impact crushing method. After the material enters the crushing chamber, it is impacted by six movable hammers rotating at high speed. The ring gear and the material collide with each other to crush, and the crushed material enters through the mesh hole with the help of airflow. Powder bag, leaving no residue. It has the advantages of high efficiency, low noise, reliable performance and product quality, safe operation, low drug hygiene and low loss.
The operation and precautions of the equipment have the following points:
1. Before use, first check if all the fasteners of the machine are tightened and the belt is tight.
2. The direction of the spindle running must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may result.
3. Check if the appliance is complete.
4. Check if there are any hard objects such as metal in the crushing room of the machine, otherwise it will break the * and affect the operation of the machine.
5. The material must be inspected for purity before pulverization. Metal hard materials are not allowed to be mixed in, so as to avoid hitting the knives* or causing burning accidents.
6. The oil cup on the machine should be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you do not continue to use, remove the leftovers from the machine.
8. Regularly check if the same screen is damaged. If it is damaged, it should be replaced immediately.
9. When the machine body is used, there will be slight vibration. Be sure to tighten the cover connecting handle to avoid accidents.
Equipment maintenance:
1. Regularly check whether the fixing nut of the movable toothed disc is loose and all the fastening parts must not be loose. In particular, check the screws inside the fixed sprocket.
2. Lubrication: Wherever the oil cup is installed, the appropriate lubricating oil should be injected before starting the machine. For continuous work, the number of refueling should be increased appropriately. The actual working time is over 300 hours, and the new lubricating oil must be replaced after cleaning the spindle bearing cavity.
3. When replacing consumable parts and rolling bearings, pay attention to the use of technical screw holes. The operation is carried out by the repairman familiar with the machine. If the user's operation is difficult, it should be timely with the factory *, do not arbitrarily dismantle.
Have seen the sharing of the above small series enough, what are the precautions when operating the universal crusher and how to maintain it? Have you learned? I also hope that this article can help everyone.
Cleaner Products,Toilet Bowl Cleaner Liquid,Toilet Block Cleaner,Stain Remover Cleaning
Wuxi Keni Daily Cosmetics Co.,Ltd , https://www.kenidailycosmetics.com