Gaoming portable electric baler use notes : Miss Chen
Foshan Chancheng Luobo Parker Automated Packaging Equipment Factory portable electric strapping baler is a relatively small and expensive equipment in the baler. This kind of baler is generally imported products, many domestic ones are poor quality, so ROBOPAC Luobo Pike portable electric balers are imported from abroad. This portable electric baler is relatively small in size and convenient for mobile use, but it is much more expensive than the desktop baler in use. There are many things to be aware of, otherwise the cost of repairing the baler is relatively expensive.
The following ROBOPAC Robbikek will share with you the portable electric beating machine?
1. The battery is used in the same way as a portable telephone battery and can be recharged. Note that when charging a new battery, the first 3 times must be sufficient for 12 hours before being taken out. During use, when the machine displays a red light and presses the tension button, the sound of the motor is not provided, so that the battery should be removed and then loaded into the machine, and several more packages can be used. When the red light is displayed for the third time, the battery is removed and installed on the machine. If the red light is displayed at this time and there is no sound, then the battery can be charged. In short, the battery must be used up before it is fully charged. The light is on).
2. Use of the charger: The battery is equipped with a charger. This is when the above one light is always on, it means charging. The first 3 times should be directly charged for 8-12 hours. After charging, the next light can be taken. The battery is off. When not charging, the charger should also be disconnected from the power supply.
3. When loading the belt, it is necessary to carry the belt from the opposite side, because it can ensure that the belt is underneath and the long belt is cut on it.
4. When the strap is loaded into the machine and the tension button is pressed, the strap is not moved. This is because the strap is not loaded with the slot. You should withdraw the tape and reload it into the machine. When the belt does not move, reload it in time.
5. When you press the pull button and press the fuse button, it means the operation is completed, this is not the second time, press the operation button.
Children Safety Clothing,Hi Vis Children Vest,Reflective Children's Clothing
Ningbo Staneex Imp. & Exp. Co., Ltd. , https://www.staneex.com