Any equipment needs maintenance, and even some companies have set up equipment maintenance departments in order to extend the service life of the machine and work normally. Otherwise, the abnormal operation of the equipment will affect the delivery of orders and affect the products. The quality of the ultrasonic cleaning machine is also an important part of the maintenance of the ultrasonic cleaning machine. Today, we will talk about the maintenance and repair points of the ultrasonic cleaning machine:
* It is forbidden to put conductive liquid (such as water) from the air inlet at the top of the ultrasonic control cabinet. Otherwise it will cause serious damage to the line system of the washing machine.
Second, pay attention to keep the ultrasonic cleaner clean. Please turn off the power when not in use.
Third, do not collide or vibrate the ultrasonic cleaner.
Fourth, let the ultrasonic cleaner away from the heat source.
Fifth, the machine should be stored in a humid environment. It will easily lead to oxidation and rust of the equipment and moisture in the line.
Sixth, the continuous working time of the ultrasonic cleaning machine should not exceed 4 hours. If the continuous working time is too long: the ultrasonic adjusting knob should be rotated to the "0" position, and the cooling fan should continue to work, in the state where the ultrasonic cleaning is not started. Allow continuous heat dissipation in the ultrasonic control cabinet for at least 2 minutes.
Seventh, after a long-running washing machine, the power knob should be first adjusted to zero position before stopping, and then the fan should be used for 3-6 minutes and then shut down to ensure the heat dissipation inside the power supply.
Eighth, the cleaning solution after the ultrasonic cleaning machine is cleaned should be precipitated, filtered or replaced in time to ensure the cleaning effect.
If you want to make the system cleaning machine work normally and stably for a long time, in addition to avoiding non-standard operation, you should also regularly maintain and maintain the cleaning machine. Then we should do the following work: 1. Regular cleaning The storage tank handles the contaminated cleaning fluid. 2. Regularly let the oil pump run once, at least 8mmin each time. 3. After the ultrasonic cleaning machine is used up, please cover it with a cover to do dust and moisture proof work. Routine maintenance: After each operation 1. Flush the hose and filter into the cleaner to remove any detergent residue to help prevent corrosion. 2. Turn off the water supply system connected to the high pressure cleaner. 3. Trigger the trigger on the servo gun lever to release all the pressure in the hose. 4. Remove the rubber hose and high pressure hose from the pressure washer. 5. Disconnect the spark plug connecting wires to ensure that the engine does not start (for engine type). Generally do the above points, the basic ultrasonic cleaning machine can operate normally, it is not easy to malfunction, and it can efficiently complete its workload.
* It is forbidden to put conductive liquid (such as water) from the air inlet at the top of the ultrasonic control cabinet. Otherwise it will cause serious damage to the line system of the washing machine.
Second, pay attention to keep the ultrasonic cleaner clean. Please turn off the power when not in use.
Third, do not collide or vibrate the ultrasonic cleaner.
Fourth, let the ultrasonic cleaner away from the heat source.
Fifth, the machine should be stored in a humid environment. It will easily lead to oxidation and rust of the equipment and moisture in the line.
Sixth, the continuous working time of the ultrasonic cleaning machine should not exceed 4 hours. If the continuous working time is too long: the ultrasonic adjusting knob should be rotated to the "0" position, and the cooling fan should continue to work, in the state where the ultrasonic cleaning is not started. Allow continuous heat dissipation in the ultrasonic control cabinet for at least 2 minutes.
Seventh, after a long-running washing machine, the power knob should be first adjusted to zero position before stopping, and then the fan should be used for 3-6 minutes and then shut down to ensure the heat dissipation inside the power supply.
Eighth, the cleaning solution after the ultrasonic cleaning machine is cleaned should be precipitated, filtered or replaced in time to ensure the cleaning effect.
If you want to make the system cleaning machine work normally and stably for a long time, in addition to avoiding non-standard operation, you should also regularly maintain and maintain the cleaning machine. Then we should do the following work: 1. Regular cleaning The storage tank handles the contaminated cleaning fluid. 2. Regularly let the oil pump run once, at least 8mmin each time. 3. After the ultrasonic cleaning machine is used up, please cover it with a cover to do dust and moisture proof work. Routine maintenance: After each operation 1. Flush the hose and filter into the cleaner to remove any detergent residue to help prevent corrosion. 2. Turn off the water supply system connected to the high pressure cleaner. 3. Trigger the trigger on the servo gun lever to release all the pressure in the hose. 4. Remove the rubber hose and high pressure hose from the pressure washer. 5. Disconnect the spark plug connecting wires to ensure that the engine does not start (for engine type). Generally do the above points, the basic ultrasonic cleaning machine can operate normally, it is not easy to malfunction, and it can efficiently complete its workload.
| PRODUCT | SPECIFICATION | NORMAL PACKING |
| Calcium Gluconate | Inj. 10% 10ml | 50amps/Box |
| FeSO4 + Folic Acid | Tab.(200mg+1mg) | 1000`S/Tin |
| Neurozin (Vitamin Complex) | Syrup 240ml | 1's/Bottle |
| Vitamin A+D | Soft Capsule 10,000+3,000iu | 500`S/Tin |
| Vitamin B1 | Injection 100mg/Ml | 10'sx10tray/Box |
| Vitamin B Complex |
Injection (B12+B1+B6) 2ml (B1+B2+B6) 10ml |
10`s/Box 50Vials/Box |
| Vitamin B6 | Inj. 100mg/Ml | 10'sx10tray/Box |
| Vitamin B12 | Inj. 1mg/2ml 0.5mg/Ml | 100amps/Box |
| Vitamin C |
Inj. 500mg/5ml Mutifavoured Tablet 1g |
100amps/Box 10's/Tin |
| Vitamin D3 | Inj. 600mg/Ml | 10`s/Box |
| Vitamin K1 | Inj. 10mg/Ml | 10`s/Box |
| Vitamin K3 | Inj. 10mg/Ml | 10`s/Box |
Vitamin A&D Capsules,Vitamin K 10Mg Injection,Multivitamin Calcium Syrup,Calcium Gluconate Injection Uses
NINGBO VOICE BIOCHEMIC CO. LTD , https://www.pharma-voice.com