HLP-80 capsule polishing machine is a new generation of products improved by the company. It is mainly composed of stainless steel material, medium speed six-pole motor, plexiglass cylinder, feeding hopper, spiral steel mesh bag, polishing brush and vacuum cleaner. It is driven by a continuously variable motor to polish and clean the powder attached to the capsules and tablets. The polished capsules are brighter, cleaner and more beautiful. The automatic polishing operation avoids environmental pollution, reduces the labor intensity of workers, and improves work efficiency by a hundred times. It has the advantages of simple structure, not easy to damage, long service life, convenient operation and maintenance, good polishing performance and high efficiency. It is a special equipment for pharmaceuticals. In order to use this product correctly, users should read the instructions carefully before using this product. The rear can be turned on:
1, Â Â Â First, you must connect the vacuum cleaner to the household vacuum cleaner.
2 Â Â Â The brush of the polisher should not be used for more than seven days. The brush must be removed and washed with alcohol and then re-used. Such as oxytetracycline, amino acid and other highly viscous drug capsules, must be cleaned daily to ensure the smoothness of the capsule.
3, Â Â Â The principle of mesh washing is once a day, or the operator should pay attention to check the cleanliness of the capsule at any time, change the mesh according to the situation, and tighten the device when the mesh is installed.
4, Â Â Â When taking the brush, loosen the fixing screws on the fixing sleeves at both ends of the spindle and then exit the fixing sleeve, put down the buckles on both sides of the cylinder, pick up the main shaft of the brush, and pull out from the spring.
5, Â Â Â When installing the brush, please pay attention to the accuracy of the brush spindle and the fit of the semi-circular bearing seat to reduce noise and long service life.
6, Â Â Â Plug in the power, press the button to use, the speed of the discharge can adjust the height of one end of the working cylinder to control.
Â
Precautions:
1, Â Pay attention to the temperature of the polishing machine at any time during operation, and stop the machine for 30 minutes to let the polishing machine dissipate heat.
2 Â When feeding to the filling port of the polishing machine, it should be intermittent at a constant speed. Do not save the machine once, so that there are too many capsules inside the machine, and the vacuum cleaner cannot suck the floating powder clean.
Note: User-supplied household vacuum cleaner
Â
address: | Baomao Industrial Zone, Chengguan Town, Xinchang County, Zhejiang, China |
Zip code: | 312500 |
phone: |
|
fax: |
|
: |
|
This hot air circulating drying oven is tray mode intermittent universal drying equipment which is high in utility, widely used in medicine, chemical industry, food industry, light industry, electronics and other fields.
1.This Drying Machine uses electric heating elements as the heat sour
2. The material is stainless steel,keep the machine durable using.
3.After switching on the electric power, switch on the fan. The rotational direction of fan shall consist with the mark.
Drying Machine
Fruit Drying Machine,Vegetable Drying Machine,Food Drying Machine,Drying Machine
Zhucheng Tongxi Commercial And Trade Co.,Ltd. , https://www.blackgarlicgroup.com