The correct use of corn harvesting machinery not only guarantees the quality of work but also extends the life of the machine. Corn harvesters should pay attention to the following four aspects when working:
1, before the operation of the corn harvester should be a smooth combination of work components clutch, throttle from small to large, to a stable rated speed before they can begin harvesting operations.
2. When the corn harvester is operating in the field, it is necessary to regularly check the quality of the cutting and crushing and the height of the stubble, and adjust the height of the header at any time according to the situation.
3. Check the operation of the picking device based on the number of grains thrown on the ground. The loss of grain should not exceed 0.5% of the total amount of corn kernels. When the loss is large, check whether the working gap between picking pans is correct.
4. When the corn harvester turns or runs along the corn line, it should raise the header to the transport position. When the corn harvester is working in the field, the corn harvester can only operate along the ditch.
Our polypropylene cap is combined by three parts which includes the outer-cap, inner cap and the medicinal synthetic polyisoprene gasket. The function of the outer cap can give us a force to open the cap .At the same time ,it also helps to prevent the external pollution. The polyisoprene gasket locates in the middle place of the combined cap. And the inner cap will contact directly with the medicine. the good quality of the inner cap can gives us a safety guarantee for our health.Our workshops comply strictly with the GMP standard and this allows to offer high quality products at best prices.
Pull-Ring Cap,Pull-Ring Cap For Plastic Bottle,Pull-Ring Cap For Soft Bag,Bottle With Pull-Ring Cap
SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com